Seagull 2
Handheld impulse fiber laser cleaning system with 200W and 300W options. Fast, precise and non-abrasive — removes rust, paint, oxides and soot without damaging the base metal.
Description
Compact impulse fiber-laser solution for metal surface preparation and restoration. Stable power, uniform beam and multiple scan patterns for different materials and thicknesses. All cleaning is done in the impulse mode (no linear/continuous mode).
- Handheld scanner with replaceable nozzles
- Programmable patterns (rectangle, line, spiral)
- Touch control with presets
- Safety interlocks and emergency stop
Key features
Applications
Rust & oxides
Steel, stainless steel, cast iron, aluminum.
Paint / coatings
Local removal and full-surface preparation.
Weld post-processing
Oxide removal, passivation.
Molds & tools
Residue removal without abrasion.
Stone / heritage
Gentle soot removal (test recommended).
Marine / automotive
Frames, decks, engine parts, wheels.
Technical specifications
Laser source (impulse)
| Parameter | 200W | 300W |
|---|---|---|
| Output power | 200 W | 300 W |
| Wavelength | 1064 nm (fiber laser) | |
| Pulse frequency | 1–3000 kHz | 1–3000 kHz |
| Pulse duration | 13–500 ns | 13–500 ns |
| Max pulse energy | 2–5 mJ (by configuration) | up to 15 mJ |
| Beam mode | Impulse (no linear/continuous) | |
Scanner & optics
| Parameter | Value |
|---|---|
| Cleaning width | 0–145 mm (adjustable) |
| Scan patterns | Line, rectangle, spiral, etc. |
| Focus distance | 160 / 210 / 254 / 330 / 420 mm |
| Input beam diameter | ≤ 10 mm |
System
| Parameter | 200W | 300W |
|---|---|---|
| Input voltage | 1φ ~110/220 V ±10% | 1φ ~220 V ±10% |
| Cooling | Air | Air |
| Dimensions (unit) | 560 × 240 × 485 mm | 560 × 240 × 485 mm |
| Umbilical cable | 5 m | |
| Operating temperature | 0…+40 °C (storage −10…+60 °C) | |
Package & options
Standard package
- Seagull 2 impulse laser source (200W / 300W)
- Handheld scanner with protective lens
- Power and umbilical cables (5 m)
- Foot pedal / trigger button
- Protective goggles (1064 nm OD)
- User manual
Options
- Nozzle kit (angled, narrow/wide)
- Fume extraction connection
- Additional lens sets
- Extended umbilical cable
- Training & commissioning
Safety & compliance
- Class-4 laser — follow safety procedures.
- Use goggles with adequate OD for 1064 nm.
- Provide ventilation/fume extraction when needed.
- Emergency stop, interlocks and key switch included.
- CE marking and conformity documents available.
FAQ
What materials can be cleaned?
Ferrous and non-ferrous metals, alloys, some stone and composites (test area recommended).
Will the base metal be damaged?
Parameters are set to remove contamination while keeping the base intact. Work is performed strictly in impulse mode.
Power requirements?
Single-phase ~110/220 V AC (verify available power on site).
Request a quote
Tell us about your application (material, area, surface requirements) — we’ll recommend a suitable power and configuration.